|1200 LPH @ 7Bar Pressure, Rotor Dirt Holding Capacity – 2 Liters In Volume
|Pump Capacity / Flow Rate
|20 LPH @ 7 Bar Pressure
|Dimensions with Filter FT600 Mounted
|750 mm (L) x 450 mm (W) x 600 mm(Ht)
|Weight of Unit
|Net Weight 70 Kgs.
OIL FILTRATION SKID CK200
* CK200 OFFLINE CENTRIFUGE FILTRATION SYSTEM
Filtek CK200 series oil purification skids are ideally suited for applications requiring
efficient contamination removal to sub micron level. Lube oil, turbine oil, gear box oil,
neat cutting oil, and fluids for honing, grinding, polishing and washing machines , waste
vegetable oil, wire drawing machines are some of the typical applications where fluid
cleanliness is very important for Prolonging its life as well as those of the machines.
CK200 will address fluid capacities from 90 liters to 400 liters. The portable and Compact
skid consists of a gear pump and motor with necessary hoses and fittings. The heart of
the system is a centrifuge which gets the drive from the pressure of the fluid.
Contamination removal down to 0.5 micron is achieved due to the tremendous
centrifugal force acting on the contaminant particle, generated by the rotor rpm.